0.5mm Board to Board connector mating Height=2.0mm

Introducing the "Micro-Matchmaker 3000" – your ultimate solution to connect tiny boards with maximum laughter! With a mating height of only 2.0mm, this 0.5mm Board to Board connector is like a match made in gadget heaven. Say goodbye to dull and boring connections, because this little connector is here to spice things up! Designed to bring joy and giggles, it's perfect for those who want to add a touch of humor to their tech life. So, if you're tired of the same old connections, grab the Micro-Matchmaker 3000 and let the laughter begin! Warning: Side effects may include uncontrollable chuckling and increased popularity among colleagues.

Shenzhen Antenk Electronics Co., Ltd. promoted a 0.5mm Board to Board connector, 30PIN Female without locating pegs Spring type, mating Height=2.0mm connector.
Board-to-board connector test check:
1. The voltage applied to the board-to-board connector should not exceed 50% of its rated voltage.
2. Board-to-board connector mounting dimensions For the insertion header, the length of the soldering foot soldered to the PCB requires that the portion of the PCB board be exposed more than 0.5 mm.
3. In the precision-tight board-to-board connector, try to use the model with positioning pin when the PCB space allows, which is convenient for manual welding.
4. Check if there is a foolproof design.

5. Check that the material used in the board-to-board connector contains lead.

Product Information:

1.Series NO:0.5mm Board to Board connecter

2.mating Height:
  H=2.0mm

3.Packing
T:Tube  A:Tray
B:Bag   U:Tube+CAP
R:tape&Reel
W:tape&Reel+CAP

Electrical
Current Rating:0.5A
Voltage Rating:50V AC/DC
Contact Resistance:50milliohm Max
Insulation Resistance:100Megohm Min
Operation Temperature:-20°C  to  +105°C
Housing Material:PA9T+30%G.F(UL94V-0)
Contact Material:Phosphor Btonze
Contact plating:Au  or  Sn  over  Ni