2.0mm Pitch 180° SMT Wafer Connector With Post

1.product introduction

A Wire To Board Connectors is an electrical connector that consists of two parts, a plug and a socket.The plug usually has a metal pin or contact point, and the socket has a corresponding jack or contact point, and the circuit is connected and disconnected by inserting and pulling.This Wire To Board Connectors provides reliable electrical contact with high bandwidth and signal transmission rates.Wire To Board Connectors are widely used in various electronic equipment and communication systems, such as computers, mobile devices, network equipment, industrial control systems, etc.They are responsible for the transmission of high-speed data, audio and video signals, power supply and other functions, providing a reliable physical connection between devices.

2.product parameter

 Specifications:
Current rating: 3A AC/DC (AWG #22)
Voltage rating: 250V AC/DC
Temperature range: -25°C to +85°C
(including temperature rise in applying electrical current)
Contact resistance: Initial value/ 10 mΩ max.
After environmental tests/ 20 mΩ max.
Insulation resistance: Initial/ 1,000 MΩ min.
Withstanding voltage: 800V AC/minute
Applicable wire: Conductor size/ AWG #28 to #22
Insulation O.D./ 0.76 to 1.5 mm
Applicable PC board thickness: 1.6 mm

3.product picture